Andre

2/5/2018
Tampa, FL

Position Desired

Mechanical Engineering
Orlando, FL; Sarasota, FL; Tampa, FL
Yes

Resume

Dear Sir / Ms:
1) I am an expert in Rotating Equipment: Compressors, Gas & Steam Turbines, Generators and Pumps. Specs API-610, 611, 612, 616, 617, 618 and 682.

2) I have (30) years of experience in Design, Preparing Specifications and RFQ Bids, Maintenance and Repair of this equipment, including Mechanical Seals and Lubricants Selection (John Crane Dual Seals and Type-28 Dry-Gas Seals).

3) I worked for (20) years with Natural Gas Compressors: both Reciprocating and Centrifugal Barrel types, driven by Electric Motors and GE-LM2500, LM6000 and Frame 3 & 5 Turbines, as well as Solar Gas Turbines. I design and specify them, select and purchase them, and then go to sites and install and commission them.

4) I worked on large Oil & Gas projects, both Upstream and Refineries, and I can produce complete FEED Design Packages, including PID and PFD Drawings, Specifications, Datasheets, HAZOP and FAT supervision, and RFQ Bid Documents.

5) I can work with minimum supervision and as Project Manager. I am also able to mentor younger engineers and designers.

I live in Florida, and I am looking for a progressive opportunity in Tampa area.
I will also consider a “Contract” position anywhere else in USA, as long as I can have time off regularly to visit with my wife in Tampa, FL.

I am *USA Citizen*, and I can TRAVEL more than (50%) of my time, including overseas.

1) Please try to find me a position, preferably on “Contract” around $65/hour, and located within (100) miles circle to ZIP 33708 (Tampa, Florida area).

2) Orlando? Miami? Jacksonville?
OK, I will also accept to work (300+) miles away from our family home in Tampa, and stay in a rental-room, working (4) days a week (4 x 10 hours), from Monday to Thursday, but this time on a “Contract” around $75/hour, with Per-Diem Split.

I am looking forward to a chance to discuss how I can contribute to your Company.
Best Regards.
--------------------------------------------------------

ENGINEERING PROFILE

As a Senior Mechanical Engineer, I successfully completed both FEED and EPC Detail Engineering Projects in Energy, Oil and Gas and Offshore industries (for 15-years). I had also supervised Brownfield work in Oil Refineries, Chemical Plants and Power Stations and managed (7) Turnarounds on time and within budget (for another 15-years). I am a highly energetic, positive attitude team player and an efficient organized leader. I have mentored engineers and draftsmen of different nationalities in task force activities.


CORE COMPETENCIES

1. Lead Engineer and Project Manager
2. Equipment sizing, selection, inquiry packages, vendor supervision
3. Equipment installation, commissioning, repairs, maintenance
4. Pumps, Compressors, Pipelines, Gas and Steam Turbines


PROFESSIONAL EXPERIENCE

UNIVERSALPEGASUS – Lafayette, LA 2012 – August 2014
ADVISORY ENGINEER
Working on Offshore Oil & Gas Projects Topsides; supervising both EPC Design, RFQ, and the Hook-up and Commissioning activities.

JACOBS Engineering - Lakeland, FL 2011 - 2012
LEAD MECHANICAL ENGINEER
Prepared major equipment bid packages (RFQ) for OCP Fertilizer, Phosphate and Sulfuric Acid plants in Morocco, analyzed proposals and made purchase recommendations, coordinated with design disciplines and reviewed vendor drawings.

SHAW Energy & Chemicals - Houston, TX 2010 - 2011
PMC - PROJECT MANAGEMENT CONSULTANT
Managed Mechanical Engineering work of FEED Contractor FLUOR and supervised (20) Engineers, for a $2 Billion Offshore Oil & Gas Project in Abu Dhabi. Equipment included 25 MW barrel compressors and 60 MW Gas Turbine-Generators. I approved Specifications, Drawings and Data Sheets. I completed my work within time and budget.

PEGASUS (MUSTANG Tampa) - Tampa, FL 2006 - 2009
SENIOR MECHANICAL ENGINEER
Prepared (30) major equipment bid packages, analyzed proposals and made purchase recommendations, coordinated with design disciplines, reviewed vendor drawings. Projects included Fertilizer plants for PCS and Mosaic, and low-sulfur diesel production units with 6 MW H2 compressors for ADNOC in Abu Dhabi and SABIC in Saudi Arabia.

MALCOLM PIRNIE - New York, NY 2005 - 2006
SENIOR PROJECT ENGINEER
Checked vendor drawing submittals and witnessed (FAT) testing of pumps, gas compressors and power generators, for (2) Sewage Treatment plants in New York City.

KBR BROWN & ROOT - Houston, TX 1997 - 2003
LEAD HOOK-UP & COMMISSIONING ENGINEER
Planned and supervised the Hook-up and Commissioning activities, for onshore and offshore oil fields in the Gulf of Mexico, for the following two major PEMEX platforms:
1. Compression platform with a total of 120,000 HP GE gas turbines handling 900 MM SCFD natural gas, driving Nuovo-Pignone booster compressors, and Solar Taurus-60 Turbo-Generators for total 15 MW capacity.
2. Process Platform with TEG, MDEA gas dehydrating and sweetening, and propane refrigeration systems, Elliott barrel compressors driven by (11) Solar Gas Turbines.

Supervised Oil Field improvement projects in Kazakhstan for Chevron (TCO); prepared designs and successfully installed compressors and boiler water pumps at Tenghiz field.

Prepared RFQ inquiry packages for Solar Taurus-60 Turbine-Generators, PID and data sheets for ExxonMobil EAP Platforms and onshore NGL plant in Nigeria.

Successfully completed, as the Lead Mechanical Engineer, the EPC detail design for offshore platform BP-Amherstia, producing 825 MM SCFD gas in Trinidad.

MUSTANG Engineering Offshore - Houston, TX 1996 - 1997
LEAD MECHANICAL ENGINEER
Supervised a team of (7) engineers working on conceptual engineering and detail design for the new EXXONMOBIL Diana SPAR Floating Platform in 5000 feet deepwater in the Gulf of Mexico, including equipment inquiry packages and specifications for Solar gas compressors, Solar Taurus-60 Turbo Generators, David Brown DB-34 multistage oil pipeline pumps and firewater pumps to handle 125,000 BPD oil and 325 MM SCFD gas.

KBR - Aristech Polypropylene Plant - La Porte, TX 1996
...

Login or Register to view the full resume.